Description Of Each Report - Minolta MINOLTAFAX 1600e Operator's Manual

9-3

Description of Each Report

TX Result Report
Prints the result of a transmission after it has been completed. If a memory transmission is made, part of
the document transmitted is also printed. The function can be used to check whether a transmission has
been successful.
When the TX/RX Result Report function of "Reporting" available in the SET utilities has been set to ON,
the report is automatically printed after the transmission has been completed.
The report is, however, automatically printed even with TX/RX Result turned OFF under the following
conditions:
• At the end of a broadcast transmission
• When a communication error occurs (The first page of the image not transmitted is also printed.)
Example: When a memory transmission has been normally completed.
FUNCTION No.
TX 1 OSAKA
➀ Image transmitted by memory
The first page of the document transmitted by
memory is printed at 50% reduction.
MINOLTA FAX
MF 1600e
This operator's manual explains the functions and operation of the FAX. It also gives some troubleshooting tips as well as
general precautions to be observed when operating the FAX. To ensure the best performance and effective use of your
FAX, read this manual carefully from cover to cover. After you have read through the manual, keep it for ready reference.
It should help in solving any operational questions you may have.
Please follow the instructions given in this manual when handling the FAX and do not touch any part of the FAX the
manual does not cover. NEVER attempt to disassemble or remodel the FAX.
The contents of this manual are subject to change without notice. No part of this manual may be quoted, reproduced, or
translated into any other language.
TX RESULT REPORT
DESTINATION STATION
OCT.17
i
DATE TIME PAGE COMM.TIME MODE
17:19 8 0H05' 14"
pp. 8-1, 8-6
1
4503U902
RESULT
FINE ECM OK
4503U903