Transmitting A Document At A Specified Time (Timer Tx) - Minolta MINOLTAFAX 1600e Operator's Manual

4-11

Transmitting a Document at a Specified Time (Timer TX)

Timer TX lets the fax scan the document to be transmitted into memory and transmit it to a destination
at a specified time. This feature enables the transmission of a document at times when special tele-
phone discount rates maybe applicable. This can contribute to reductions in communication costs.
The timer can be set up to 24 hours in advance.
The number of timer transmissions that can be made varies by model as detailed below.
• Up to 20
Note, however, that this capacity is decreased if any feature involving the use of memory has been
specified for other documents.
1
• Check that the message "SET DOC. FACE
DOWN" is shown on the Message Display.
• Make the necessary control panel settings
and load the document (so that the
document can be immediately transmitted).
• Press the Function key.
Function
FUNCTION
SEL. 0 - 7 / OR FUNCTION
2
Press "3" of the Numeric keys to select
Timer TX.
3
3 TIMER
p. 4-2
4503U09I
4258U106
DEF
4503UF3I
4503U413
3
From the Numeric keys, enter the time (24-
hour system) at which to transmit the
document.
TIMER =
OK = YES
Example: 11:30 p.m. → Press 2, 3, 3, and 0.
ABC
2
3
If you have entered a wrong number, press
the Left Arrow key. This brings the cursor
back one position. Now, enter the correct
number.
L
:
4258U122
DEF DEF
3 0
4503U39I
4503UC4I