Selecting The Resolution - Minolta MINOLTAFAX 1600e Operator's Manual

Selecting the Resolution

You can select the resolution for transmission based on the characteristics of the document to be trans-
mitted so that the receiver gets a highly legible document. There are three types of resolution to choose
from.
Use this selection for transmitting a standard document containing characters of a
Standard
common size, either handwritten or word-processed. Standard resolution will result in
the fastest transmission times.
Standard
Fine (S-Fine)
Half Tone
4503U301
Offering better resolution than Standard, Fine is suitable for newspapers and similar
Fine
documents which have small type or detailed illustrations, or when there is a willing-
Standard
ness to trade speed for higher image quality.
Fine (S-Fine)
Half Tone
4503U302
Offering better resolution than Fine, Super Fine is suitable for map, drawing, tiny type
S-Fine
and very detailed illustartions, it takes longer to transmit.
Standard
Fine (S-Fine)
(blink)
Half Tone
4503U303
Suitable for documents with halftone photo illustrations and for colored documents.
Half Tone
The Half Tone setting is not mutually exclusive of Standard or Fine resolutions. Reso-
Standard
lution can be set in addition to Half-Tone.
Fine (S-Fine)
(Note: Half Tone significantly increases transmission time.)
Half Tone
4503U303-2
1
Selecting a resolution setting:
Check that the message "SET DOC. FACE
DOWN" is shown.
Example:
MEM. FULL / TX CANCEL
OK = YES
2
Press the Resolution key to select the desired
resolution. Each time the key is pressed a
new resolution is selected.
Example:
Standard
Fine (S-Fine)
Half Tone
Resolution
(TX=START)
4503U229
4503U304
How to Transmit a Document - Basics
Standard Standard
Fine (S-Fine) Fine (S-Fine)
Half Tone
Half Tone
Resolution Resolution
Standard Standard
Fine (S-Fine) Fine (S-Fine)
Half Tone Half Tone
Resolution Resolution
Standard Standard
Fine (S-Fine) Fine (S-Fine)
Half Tone Half Tone
Resolution Resolution
When the document has been transmitted,
the initial setting of Standard is
automatically reset.
The SET utilities function allows selection
of another resolution type as the default.
SET Utilities p. 8-3
3-2
Goes on
Blink
Off
4503U305-1