Reduction Rx; Confidential Mailbox; Password Rx; Footer - Minolta MINOLTAFAX 1600e Operator's Manual

8-5
Outline of the SET Utilities

4. Reduction RX

Sets the print mode when printing a document received from the other party. Select either the Reduction
Priority mode (Reduction RX ON) or Full Size Priority mode (Reduction RX OFF) mode according to
your needs. p. 3-19

5. Confidential Mailbox

Sets the mailbox ID used for Mailbox TX/RX.
Enter a desired 4-digit number.
The number of mailboxes: 5
pp. 4-14, 4-17

6. Password RX

Only when the transmitting party's password corresponds with your own password can you receive a
document from that party. When Password RX is set to ON, you cannot receive a document unless the
transmitting party uses your password. Password RX provides a means of controlling fax communica-
tions and avoiding unnecessary direct mail.

7. Footer

Footer prints on the paper the date, time, reception control number and page number of the received doc-
ument. By printing an Activity Report using the communication number, you can identify where the doc-
ument came from, when it came in, and how many pages it was. The footer appears at the bottom of each
page in a document. p. 5-26

5. Machine Operation

1. Power Save Mode

Minimizes power consumption while the fax is not used.
On reception of a print command (as for fax reception), the fax starts warm-up and, in about 25 sec., it
starts printing. The Power Save Mode is set to ON in the initial setting.
When this function is set to ON, you can also set the time period during which this mode is enabled.
Example: Enabling Power Save Mode for the period from 17:00 p.m. to 8:00 a.m.
You can set the Power Save Mode to remain ON continuously.
Example: By setting the same time for the On Time and Off Time, the Power Save Mode is set to
remain ON continuously.
→ PSM ON TIME = 8:00, PSM OFF TIME = 8:00
You can also set the Power Save Mode to OFF.
By setting the Power Save Mode to OFF, you can print out without waiting for the fax to warm up.

2. LCD Contrast

Adjusts the brightness of the Message Display.
Set the brightness to the desired level.

3. Tone/Pulse

Sets the fax machine's dialing to the type of telephone line it is connected to.
Select the type of telephone line you are currently using.
p. 5-25
p. 2-11
p. 2-12
p. 2-6