Buzzer Volume; G3 Ecm; Reporting; Activity Rep - Minolta MINOLTAFAX 1600e Operator's Manual

4. Buzzer Volume

Sets the volume of the alarm tone.
Set the volume to the desired level.

5. G3 ECM

Sets the error correcting mode, or ECM, for fax transmission. ECM is the mode in which fax communica-
tions are made with the other party through repeated checking-and-correcting sequences to ensure there is
no image distortion due to telephon line disturbance.
The machine on the other party's end must be equipped with ECM in order for this to function. If not,
ECM is automatically turned OFF even if you set it to ON. When ECM is turned ON, it may take longer
to make fax communications.

6. Reporting

1. Activity Rep.

Sets the function to automatically print an Activity Report.
When this function is turned ON, an Activity Report is printed each time there are 60 fax communica-
tions. p. 9-6

2. Reserv. Rep.

Sets the function to automatically print a Reservation Report.
When this function is turned ON, a Reservation Report is printed before a broadcast transmission or poll-
ing reception is made, allowing you to check the details of the reservation request.
• Broadcast Reservation Report
• Polling Reservation Report

3. TX/RX Result Rep.

Sets the function to automatically print a TX/RX Result Report.
When this function is turned ON, a Result Report is automatically printed even when a fax communica-
tion or polling TX (single mode) has been normally completed. (A Result Report is automatically printed
when a communication error occurs or a broadcast transmission is completed, even when this function is
turned OFF.) pp. 9-3, 9-4, 9-5

7. Initial User Data

1. Date & Time
Sets the date and time-of-day for your machine.

2. User Fax No.

Sets the fax no. of your machine.

3. User Name

Sets your name. pp. 2-12, 2-16

4. User Password

Sets your password.
The password set here is used for Password TX and Password RX
p. 9-10
p. 9-10
pp. 2-12, 2-14
pp. 2-12, 2-15
Outline of the SET Utilities
pp. 2-12, 2-17, 5-16, 5-25
8-6