Setting Of Rx Operations; Storing The Document Received In Memory (Memory Rx Mode); Programming For Memory Rx Mode - Minolta MINOLTAFAX 1600e Operator's Manual

5-19

Setting of RX Operations

Storing the Document Received in Memory (Memory RX Mode)

Memory RX Mode stores in memory the contents of a document received. The document is not
printed unless the fax receives a print command. This feature provides a means of controlling the doc-
uments received through fax. The print command may be a timer or password.

Programming for Memory RX Mode

1
• Check that the message "SET DOC. FACE
DOWN" is shown on the Message Display.
• Press the Set key four times.
Set
The display changes to the RX Operation
mode.
RX OPERATION ?
YES / or 1 - 8
2
Press "1" of the Numeric keys.
1
The display now changes to the Memory RX
Mode.
1 MEMORY RX MODE
4503U540
p. 5-3
X 4
4503U84I
4258U186
4503UF1I
4258U187
The print timer command causes the fax to start
printing the document stored in memory when the
specified time arrives. The password print com-
mand, on the other hand, causes the fax to start
printing when a password is input.
A print timer command can be used in combina-
tion with a password print command. When a print
timer command has previously been defined and if
you want a printout before the set time, you can
enter the password to let the fax print the docu-
ment earlier than the set time if a password print
command has also been set.
3
Press the Left Arrow key to select the
memory reception mode [ON].
ON
- SELECT & PUSH "YES" -
Left : On - Enables Memory RX.
Right : Off - Disables Memory RX.
L
4
Check that [ON] is selected, then press the
Yes key.
OFF
4258U177
R
4503UC7I
Yes
4503UAI