Printing Sender Information For The Receiving End (Header) - Minolta MINOLTAFAX 1600e Operator's Manual

5-17
Setting of TX Operations

Printing Sender Information for the Receiving End (Header)

Header prints on the paper at the receiving end information to identify that the document was transmit-
ted by you. The header appears at the top of each page in a document, showing the sender name, page
number, and the time of transmission.
1
JUN. 08 '96 (MON) 15:38
ATTENTION : MR.
RE :
➀ Date of Transmission
➁ Time of Transmission
➂ Sender Name (Your Name)
NOTE
The header is printed on the area 4 mm (0.16 inch) from the leading edge of the paper. Therefore,
make sure that the area 4 mm (0.16 inch) from the leading edge is blank, so the content of the docu-
ment can be fully transmitted.
1
• Check that the message "SET DOC. FACE
DOWN" is shown on the Message Display.
• Press the Set key three times.
Set
The display changes to the TX Operation
mode.
TX OPERATION?
YES / or 1 - 3
2 3
TOKYO
.
p. 5-3
X 3
4503U83I
4503U502
4
03 - 5423 - 7801
FROM :
➃ Transmitter Phone No.
➄ Page No.
2
Press "3" of the Numeric keys.
The display now changes to the Header
mode.
3 HEADER
5
PAGE. 1/2
.
4503U530
DEF
3
4503UF3I
4503U517