3
Using the Left or Right Arrow key, select the
desired polling mode, either Single or Multi.
SINGLE
- SELECT & PUSH "YES" -
L
For Single Mode
The display changes to indicate that the fax
is in a standby state waiting for polling.
Example:
JUN. 8
15:38
WAITING POLL TX
When doing the Polling transmission by
Direct transmission, do not remove a
document in the standby state from the
Document Feeding Tray. If the tray is left
unloaded for 10 sec. or longer, Polling TX is
automatically canceled.
When doing a Polling transmission by Direct
transmission, and in the standby state of the
Polling transmission, you cannot transmit
another document using the Document
Feeding Tray.
Letting the Other Party Execute the Transmission of Your Document (Polling TX)
MULTI
4258U133
R
4503UC7I
100%
4258U134
Check the setting you have made and, if it is
correct, press the Yes key to validate the
polling mode.
Yes
NOTE
• When doing the Polling transmission by
Direct transmission, the fax waits for direc-
tions for the Polling transmission while the
document remains loaded on the Document
Feeding Tray.
• When doing the Polling transmission by
Memory transmission, the fax waits for direc-
tions from the Polling transmission after
reading the document into memory.
4-22
4503UAI