Connecting To The Telephone Line; Basic Connection Procedure - Minolta MINOLTAFAX 1600e Operator's Manual

Connecting to the Telephone Line

NOTE
1. Connection should be done by a service technician.
2. Telephone cord accessories will vary: Type A, Type B, Type C, Type D, depending on the
requirements of the country.
3. The ground wire (E) is available in a version intended for a specific country. (EX. Germany)
4. A standard telephone can be connected, if necessary.
5. See the user instructions for the UK (U.K. version), p. x.

Basic Connection Procedure

1
Connect the plug of the cord to the telephone
jack of the telephone line.
2
Connect the other plug of the cord to the line
connection on the backside of the fax.
3
Connect the currently used telephone cord to
the TEL connection on the backside of the
fax.
4258U482
4
Connection is completed. Load the paper
according to "LOADING PAPER".
p. 11-1
NOTE
When changing the paper size, be sure to enter.
p.11-2
4503U122
1-8
Setting-Up
4503U121
4503U123