Setting Of Tx Operations; Transmitting To Password-Secured Destinations (Password Tx) - Minolta MINOLTAFAX 1600e Operator's Manual

Setting of TX Operations

Transmitting to Password-Secured Destinations (Password TX)

Only when your password corresponds with the destination's password can you transmit a document
to that destination. This is called "Password Transmission".
NOTE
• To perform a Password TX, you and the destination must enter the same User Password.
pp 2-11, 2-18
1
• Check that the message "SET DOC. FACE
DOWN" is shown on the Message Display.
• Press the Set key three times.
Set
The display changes to the TX Operation
mode.
TX OPERATION?
YES / or 1 - 3
2
Press "2" of the Numeric Keys.
2
The display now changes to the Password
TX mode.
2 PASSWORD TX
4503U529
p. 5-3
X 3
4503U83I
4503U502
ABC
4503UF2I
4258U182
When Password TX is set to ON, you cannot
transmit a document unless you use the destina-
tion's password.
Even though Password TX is set to ON, you can
transmit a document to any destination registered
in One Touch Dial, Speed Dial and Phone Book.
Password TX provides a means of controlling fax
communications and, when transmitting an impor-
tant document, avoiding transmission to the wrong
destination.
3
Press the Left or Right Arrow key to turn On
or Off the Password TX function.
ON
- SELECT & PUSH "YES" -
Left : On - Enables Password TX.
Right : Off - Disables Password TX.
L
4
Check that the setting has been made
correctly, then press the Yes key.
Yes
5
This completes the setting for Password TX.
Press the NO key.
Then, the initial screen appears.
No
5-16
OFF
4258U177
R
4503UC7I
4503UAI
4503UBI