I Blank Channels; I Frequency Transferring - Icom IC-910H Instruction Manual

6
MEMORY OPERATION

I Blank channels

Memory channels 6–99 are blank channels by factory
default. They have no contents programmed.
When a blank channel is selected, the "BLANK" indi-
cator appears and the frequency band is displayed
2 sec. after the selection.
"--430-" appears while in 430 MHz band.
"-1200-" appears while in 1200 MHz band.

I Frequency transferring

The frequency and operating mode in a memory chan-
nel can be transferred to the VFO.
Frequency transferring can be performed in either VFO
mode or memory mode.
◊ Transferring in memory mode
This is useful for transferring frequency and operating
mode while operating in memory mode.
When you have changed the frequency or operat-
ing mode in the selected memory channel:
• Displayed frequency and mode are transferred.
• Programmed frequency and mode in the memory
channel are not transferred, and they remain in the
memory channel.
q Push [DN M] or [L UP] to select the memory chan-
nel to be transferred in memory mode.
• And, set the frequency or operating mode if required.
w Push [M≈V 6] for 1 sec. to transfer the frequency
and operating mode.
• Displayed frequency and operating mode are transferred
to the VFO.
e Push [V/M 1] to return to VFO mode.
42
MEMO
B L A N AN K
Operating band appears
after 2 sec.
MEMO
B L A N AN K
From The N3UJJ.COM Document Library From The N3UJJ.COM Document Library
◊ Programming a blank channel
q Push [V/M 1] to select VFO mode.
w Set the desired operating frequency, mode, etc.
e Push [MW 4] for 1 sec. to program the memory
channel.
• "BLANK" indicator disappears.
◊ Transferring in VFO mode
This is useful for transferring programmed contents to
VFO.
q Push [V/M 1] to select VFO mode.
w Push [DN M] or [L UP] to select the memory chan-
nel to be transferred.
• "BLANK" appears if the selected memory channel is a
blank channel. In this case transferring is impossible.
e Push [M≈V 6] for 1 sec. to transfer the frequency
and operating mode.
• Transferred frequency and operating mode appear on
the frequency readout.
USB USB
USB USB
USB USB
MEMO
Beep tone sounds.
MEMO
Select VFO mode.
VFO A