I Memory Clearing; I Frequency Transferring - Icom IC-703 Instruction Manual

I Memory clearing

Any unnecessary memory channels can be cleared.
The cleared memory channels become blank chan-
nels.
q Select
functions.
• Push [DISPLAY] once or twice to select .
• Push [MENU] one or more times to select
w Push [
] to select memory mode.
(F-3)
e Rotate [M-CH] to select a memory channel to be
cleared.
r Push [
] for 1 sec. to clear the contents.
(F-2)
• The programmed frequency and operating mode dis-
appear and "}" appears.
t To return to VFO mode, push [

I Frequency transferring

The frequency and operating mode can be trans-
ferred from memory mode to VFO mode.
q Select
functions.
• Push [DISPLAY] once or twice to select .
• Push [MENU] one or more times to select
w Select VFO mode with [
e Select a memory channel with [M-CH].
• Select memory mode to confirm the memory channel's
contents, if desired; then return to VFO mode.
• "}" appears if the selected memory channel is a
blank channel (and does not have contents). In this
case transferring is not possible.
r Push [
] for 1 sec. to transfer the frequency
(F-3)
and operating mode.
• Transferred frequency and operating mode appear in
the display.
.
] again.
(F-3)
.
].
(F-3)
MEMORY OPERATION
[M-CH] [MENU] [F-2]
USB
CH
MEMO
BLANK
CH
MEMO
[M-CH] [MENU]
[EXAMPLE]: Transferring contents of memory 16.
Operating frequency: 21.320 MHz/USB (VFO)
Contents of memory 16: 14.020 MHz/CW
USB
VFO A
CH
USB
VFO A
CH
CW
VFO A
CH
7
[F-3]
[DISPLAY]
SPLIT
Push for
1 sec.
F-2
[F-3]
[DISPLAY]
M-CH SHIFT
SPLIT
Push for
1 sec.
F-3
7
58