Blank Channels; Frequency Transferring - Icom IC-910H Instruction Manual

6
MEMORY OPERATION
n Blank channels
Memory channels 6–99 are blank channels by factory
default. They have no contents programmed.
When a blank channel is selected, the "BLANK" indica-
tor appears and the frequency band is displayed 2 sec.
after the selection.
"--430-" appears while in 430 MHz band.
"-1200-" appears while in 1200 MHz band.
n Frequency transferring
The frequency and operating mode in a memory chan-
nel can be transferred to the VFO.
Frequency transferring can be performed in either VFO
mode or memory mode.
D Transferring in memory mode
This is useful for transferring frequency and operating
mode while operating in memory mode.
When you have changed the frequency or operating
mode in the selected memory channel:
• Displayed frequency and mode are transferred.
• Programmed frequency and mode in the memo-
ry channel are not transferred, and they remain in
the memory channel.
q Push [DN Z] or [Y UP] to select the memory chan-
nel to be transferred in memory mode.
• And, set the frequency or operating mode if required.
w Push [M≈V 6] for 1 sec. to transfer the frequency
and operating mode.
• Displayed frequency and operating mode are trans-
ferred to the VFO.
e Push [V/M 1] to return to VFO mode.
42
MEMO
B L ANK
Operating band appears
after 2 sec.
MEMO
B L ANK
D Programming a blank channel
q Push [V/M 1] to select VFO mode.
w Set the desired operating frequency, mode, etc.
e Push [MW 4] for 1 sec. to program the memory
channel.
• "BLANK" indicator disappears.
D Transferring in VFO mode
This is useful for transferring programmed contents to
VFO.
q Push [V/M 1] to select VFO mode.
w Push [DN Z] or [Y UP] to select the memory chan-
nel to be transferred.
• "BLANK" appears if the selected memory channel is a
blank channel. In this case transferring is impossible.
e Push [M≈V 6] for 1 sec. to transfer the frequency
and operating mode.
• Transferred frequency and operating mode appear on
the frequency readout.
USB
USB
USB
MEMO
Beep tone sounds.
MEMO
Select VFO mode.
VFO A