W Frequency Transferring - Icom IC-707 Instruction Manual

W Frequency transferring
The frequency and operating mode in a memory
channel can be transferred to VFO mode.
While in VFO mode
This method is useful for transferring a memory
channel's contents to VFO.
1) Select VFO A or VFO B.
2) Push the [FUNC] switch.
e If required, rotate the main dial to select a memory
channel number.
3) Push and hold the [M > VFO] switch until the
speaker emits 3 beep tones.
e Transferred frequency and operating mode appear.
While in MEMORY mode
f NOTE: When you change the frequency or
f operating mode in the selected memory chan-
Y el:
f — Displayed frequency and mode are trans-
G ferred.
f — Programmed frequency and mode are NOT
i transferred. They remain in the memory
Z Channel.
Push the [FUNC] switch
e If required, rotate the main dial to select a memory
channel number.
Push and hold the [M > VFO] switch until the
speaker emits 3 beep tones.
èe The memory channel contents are transferred to
the previously-used VFO.
To return to VFO mode, push the [FUNC] switch,
then push the [V/M] switch.
The frequency tranferring can be performed in either
VFO mode or in MEMORY mode.
Transferring example in VFO mode
VFO A frequency and operating mode : 21.320 MHz, USB mode
Memory channel 18 contents : 14.020 MHz, CW mode
Transferring example in MEMORY mode
Memory channel 19 contents : 14.028 MHz, CW mode
Previously used VFO : VFO A