Aastra 9000i Series Administrator's Manual page 691

Aastra Web UI
Step Action
3 In the "Download Protocol" field, select the protocol from the list to use for downloading the new
firmware. Valid values are:
• TFTP
• FTP
• HTTP
• HTTPS
4 In the "Server" field, enter the IP address in dotted decimal format, of the TFTP configuration server,
or the domain name of the FTP, HTTP, or HTTPS configuration servers (dependant on the protocol
you selected in step 3.) For example: 432.221.45.6.
5 In the "Path" field, enter the path location on the protocol server for where the new firmware resides.
For example, C:\aastra\configserver\firmwareupgrade.
6 In the "Port" field, enter the port number of the protocol server. For example, 80 (for HTTP) or 443
(for HTTPS).
Note: This field is not applicable to the TFTP and FTP protocols.
7 (FTP only) In the "Username " field, enter the username that is used for authentication when the FTP
server is accessed.
8 (FTP only) In the "Password " field, enter the password that is used for authentication when the FTP
server is accessed.
9 Click
This starts the upgrade process. If the upgrade is successful the following message displays on the
screen: "Firmware Upgrade Successful".
8-4
.
41-001343-01 Rev 02, Release 3.2.2