Aastra 9000i Series Administrator's Manual page 487

Keys States and LED Behavior
There are two new call states on the phones that support SCA bridging:
Bridge-active - A bridged call is in progress
•
Bridge-held - The 3rd-party (i.e., non-SCA party) in the bridge is on hold.
•
The following tables provide the key states and LED behavior in an SCA bridge call for users
involved in an SCA call and users not involved in the SCA call.
Line Keys and Idle Screens
State
Idle
Seized
Progressing (outgoing call)
Alerting (incoming call)
Active
Held
Hold private
Bridge-active
Bridge-held
5-210
Call LED
N/A
Solid Green
Green
Blinking Unselected Red
Solid Green
Slow Flashing Green
Slow Flashing Green
Solid Green
Slow Flashing Green
Call Caller ID Non-Call LED
N/A Off
None Solid Red
Called Part7 Solid Red
N/A
Far-end Solid Red
Far-end Slow Flashing Red
Far-end Solid Red
Far-end Solid Red
Far-end Solid Red
41-001343-01 Rev 02, Release 3.2.2
Non-Call
Caller ID
N/A
None
None
Far-end
Far-end
Far-end
Far-end
Far-end