Aastra 9000i Series Administrator's Manual page 753

Parameter –
auto resync time
Time (24-hour)
(in Web UI)
Description
Format
Default Value
Range
Example
Parameter–
auto resync max delay
Maximum Delay
(in Web UI)
Description
Format
Default Value
Range
Example
A-28
Aastra Web UI
Configuration Files
Sets the time of day in a 24-hour period for the IP phone to be
automatically updated. This parameter works with TFTP, FTP, HTTP and
HTTPS servers.
Notes:
1. The resync time is based on the local time of the IP phone.
2. The value of 00:00 is 12:00 A.M.
3. When selecting a value for this parameter in the Aastra Web UI, the
values are in 30-minute increments only.
4. When entering a value for this parameter using the configuration files,
the value can be entered using minute values from 00 to 59 (for
example, the auto resync time can be entered as 02:56).
5. Auto-Resync adds up to 15 minutes random time to the configured
time. For example, if the auto resync time parameter is set to 02:00,
the event takes place any time between 02:00 and 02:15.
6. When the language on the phone is set to French or Spanish, you must
enter the time in the format "00h00" (configuration files only).
hh:mm
00h00 (for French and Spanish configuration files)
Aastra Web UI
00:00
Configuration Files
00:00
Aastra Web UI
00:00 to 23:30 (in 30 minute increments)
Configuration Files
hh = 00 to 23
mm = 00 to 59
auto resync time: 03:24
Configuration Files
Aastra Web UI
Specifies the maximum time, in minutes, the phone waits past the scheduled
time before starting a checksync.
Integer
15
0-1439
auto resync max delay: 20
Advanced Settings->Configuration Server->
Auto-Resync
aastra.cfg, <model>.cfg, <mac>.cfg
aastra.cfg, <model>.cfg, <mac>.cfg
Advanced Settings->Configuration Server->
Auto-Resync
41-001343-01 Rev 02, Release 3.2.2