Aastra 9000i Series Administrator's Manual page 654

Aastra IP Phone UI
Step Action
4 Select 802.1x Settings.
5 Select 802.1x Mode.
6 Select EAP-MD5 to configure the phone to use MD5 authentication;
or
Select EAP-TLS to configure the phone to use TLS authentication.
802.1x Mode
Disabled
EAP-MD5
EAP-TLS
Note: The 802.1x Protocol is disabled by default. If you select EAP-TLS authentication, you must use
the configuration files or the Aastra Web UI to configure the certificates and private key for the phone.
7 Press Done (on 8 and 11-Line LCD phones)
or
Press Set (on 3-Line LCD phones).
8 To configure MD5, select EAP-MD5 Settings.
41-001343-01 Rev 02, Release 3.2.2
802.1x Settings
1. 802.1x Mode
2. EAP-MD5 Settings
- Select
Done -
4. 802.1x Settings
Next
Cancel -
Done -
1. 802.1x Mode
Next
2. EAP-MD5 Settings
Yes
Next
1. 802.1x Mode
Enter
Next Enter
Enter
Enter
802.1x Mode
Disabled
Set
Next
802.1x Mode
EAP-MD5
Set
Next
802.1x Mode
EAP-TLS
Set
Next
6-33