Polling Action URIs
Another way to reach a phone behind a NAT/firewall is to have the phone make an XML call at
periodic intervals. An Administrator can use the action uri poll parameter that commands the
phone to perform an XML call at configurable intervals.
An Administrator can specify the URI to be called and specify the interval between polls using the
configuration files or the Aastra Web UI. Configuration of this feature is dynamic (no reboot
required).
Configuring Polling Action URI via the Configuration Files
Use the following parameters to configure the polling Action URI on the IP Phones.
•
action uri poll
•
action uri poll interval
Configuration Files
For the specific parameter you can set in the configuration files, see Appendix A, the section,
URI Settings"
on
page A-149.
41-001343-01 Rev 02, Release 3.2.2
"Polling Action
5-309