Aastra 9000i Series Administrator's Manual page 802

Parameter –
call waiting tone
Play Call Waiting Tone
(in Web UI)
Description
Format
Default Value
Range
Example
Parameter –
call waiting tone period
Call Waiting Tone Period
(in Web UI)
Description
Format
Default Value
Range
Example
41-001343-01 Rev 02, Release 3.2.2
Aastra Web UI:
Configuration Files
Enable or disables the playing of a call waiting tone when a caller is on an
active call and a new call comes into the phone.
Note: The Call Waiting Tone feature works only if the Call Waiting
parameter is enabled.
Boolean
1 (enabled)
0 (disable)
1 (enabled)
call waiting tone: 0
Aastra Web UI: Basic Settings->Preferences
Configuration Files aastra.cfg, <model>.cfg, <mac>.cfg
Specifies the time period, in seconds, that the call waiting tone is audible
on an active call when another call comes in. When enabled, the call
waiting tone plays at regular intervals for the amount of time set for this
parameter. For example, if set to "30" the call waiting tone plays every 30
seconds. When set to "0", the call waiting tone is audible only once on the
active call.
Integer
0
0-4294967295
call waiting tone period: 30
Basic Settings->Preferences->General
aastra.cfg, <model>.cfg, <mac>.cfg
A-77