Aastra 9000i Series Administrator's Manual page 461

Configuring DCP/GCP Using the Configuration Files
(for Sylantro Servers)
Use the following procedures to configure DCP/GCP using the configuration files.
Configuration Files
To set DCP/GCP in the configuration files, see Appendix A, the section,
Feature Key/Expansion Module Key Parameters"
Configuring Directed Call Pickup (DCP) Using the Aastra Web UI
(for Sylantro Servers)
Use the following procedure to configure Directed Call Pickup using the Aastra Web UI. This
procedure uses the 6755i IP Phone as an example.
Aastra Web UI
1 Click on Operation->Softkeys and XML
or
Click on Operation->Programmable Keys
or
Click on Operation->Expansion Module <N>.
Depending on your phone-model, the key configuration screen displays. The 6755i Key Screen is
shown as an example.
2 Select a key for which to configure Directed Call Pickup.
3 In the "Type" field, select Directed Call Pickup.
5-184
"Softkey/Programmable Key/
on page A-199.
41-001343-01 Rev 02, Release 3.2.2