Aastra 9000i Series Administrator's Manual page 491

Configuring Park/Pickup Key Using Configuration Files
In the configuration files, you configure the park/pickup keys using the key parameters. You also
must specify the "sip lineN park and pickup config" parameter. The following examples show
park/pickup configurations using specific servers.
Examples for Models with 8 and 11-Line LCDs
Server
Asterisk softkeyN type: park
softkeyN label: parkCall
softkeyN states: connected*
sip lineN park pickup config: 70;70;asterisk
Sylantro softkeyN type: park
softkeyN label: parkCall
softkeyN states: connected*
sip lineN park pickup config:*98;*99;sylantro
BroadWorks softkeyN type: park
softkeyN label: parkCall
softkeyN states: connected*
sip lineN park pickup config:*68;*88;broadworks
*When you configure a softkey as "Park", you must configure the state of the softkey as "connected".
**When you configure a softkey as "Pickup", you can configure the state of the softkey as "idle, outgoing", or just
"idle", or just "outgoing".
Examples for Models with 3-Line LCDs
Server
Asterisk prgkeyN type: park
sip lineN park pickup config: 70;70;asterisk
Sylantro prgkeyN type: park
sip lineN park pickup config: *98;*99;sylantro
BroadWorks prgkeyN type: park
sip lineN park pickup config: *68;*88;broadworks
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section,
"Park and Pickup Settings"
and "Programmable Key Settings for 9143i, 6730i, 6731i, 6735i, 6753i, and 6755i"
5-214
Park Configuration
Park Configuration
Note: The 6730i, 6731i, 6735i, 6737i, 6753i, 6755i and 9143i do not
allow for the configuration of labels and states for programmable keys.
on page A-198, "Softkey Settings for 8 and 11-Line LCD phones"
Pickup Configuration
softkeyN type: pickup
softkeyN label: pickupCall
softkeyN states: idle, outgoing**
sip lineN park pickup config: 70;70;asterisk
softkeyN type: pickup
softkeyN label: pickupCall
softkeyN states: idle, outgoing**
sip lineN park pickup config: *98;*99;sylantro
softkeyN type: pickup
softkeyN label: pickupCall
softkeyN states: idle, outgoing**
sip lineN park pickup config: *68;*88;broadworks
Pickup Configuration
prgkeyN type: pickup
sip lineN park pickup config: 70;70;asterisk
prgkeyN type: pickup
sip lineN park pickup config: *98;*99;sylantro
prgkeyN type: pickup
sip lineN park pickup config: *68;*88;broadworks
on
on page A-208.
41-001343-01 Rev 02, Release 3.2.2
page A-201