Aastra 9000i Series Administrator's Manual page 705

Aastra Web UI
Step Action
8 Enter a debug level value in the "Debug Level" field for a module. Valid values are:
The value of "0" turns all debug levels OFF for a module. The value of "65535" turns all debug levels
ON for a module.
To turn two or more debug levels on at the same time, you add the value associated with each level.
For example, Fatal Errors + Errors + Warnings = 1 + 2 + 4 = 7
log module linemgr: 7
log module user interface: 7
log module sip: 7
In the above example, fatal errors, general errors, and warnings are logged for the line manager, user
interface, and SIP call control modules.
9 Click
10 Click on Operation->Reset.
11 In the "Restart Phone" field click
To perform support tasks:
12 To store the local configuration file to the specified location, click on
local.cfg" field.
13 To store the server configuration file to the specified location, click on
"Get server.cfg" field.
14 To display task and stack status information, as well as Free Memory and Maximum Block Free
Memory on the phone, click on
Note: The local and server configuration file information and the task and stack status information is
for use by Aastra Technical Support for troubleshooting purposes.
Reference
For information that describes solutions to most common problems using the IP phones, see the
next section,
9-8
Debug Level Value
Fatal Errors 1 (default)
Errors 2
Warnings 4
Init 8
Functions 16
Info 32
All debug 0
levels OFF
All Debug 65535
Levels ON
to save your settings.
to restart the IP phone.
in the "Show Task and Stack Status" field.
"Troubleshooting Solutions" on page 9-19.
41-001343-01 Rev 02, Release 3.2.2
in the "Get
in the