Aastra 9000i Series Administrator's Manual page 1000

#sip dial plan: [01]xxx|[2-8]xxxx|91xxxxxxxxxx
#sip dial plan terminator: 1
#-------------------------------------------------------------------
# General SIP Settings
# ====================
#sip session timer: 30
#sip transport protocol: 0 # use UDP (1), TCP (2) or both (0) for sip
#sip use basic codecs: 1
#sip out-of-band dtmf: 0
# Global SIP User Settings
# ========================
#
# Notes:
# These settings are used as the default configuration for the hard
# key lines on the phone. That is:
#
# L1 to L4 on the 6757i and 6757iCT
# L1 to L3 on the 6753i
#
# These can be over-ridden on a per-line basis using the per-line
41-001343-01 Rev 02, Release 3.2.2
# accecpt any 4 digit number beginning
# with a 0 or 1, any 5 digit number
# beginning with a number between 2 and 8
# (inclusive) or a 12 digit number
# beginning with 91
# enable sending of the "#" symbol to
# to the proxy in the dial string
# enable support of RFC4028, the default
# value of 0 disables this functionality
# messaging
# limit codecs to G711 and G729
# turn off support for RFC2833 (on by
# default)
C-15