Aastra 9000i Series Administrator's Manual page 1010

#dns2:
# Time Server Settings
# =====================
#time server disabled: 1 # Time server disabled.
#time server1:
#time server2:
#time server3:
# Time Server Disabled:
# 0 = false, means the time server is not disabled.
# 1 = true, means the time server is disabled.
# NAT Settings
# = = = = = = =
# Option 2:
#
# If you are using a session border controller, you should set the
# outbound proxy to the session border controller address
#sip outbound proxy: sbc.aastra.com
#sip outbound proxy port: 0
# Option 3:
#
# If you know the public IP address of your NAT device and and have
# opened up a port for the SIP messages then you can statically
# assign this information.
#sip nat ip: 67.123.122.90
#sip nat port: 5890
# Additional Network Settings
# ============================
#sip rtp port: 3000
#-----------------------------------------------------------------
41-001343-01 Rev 02, Release 3.2.2
# Enable time server and enter at
# least one time server IP address or
# qualified domain name.
# a value of 0 enables SRV
# lookups for the address of
# the proxy.
# Eg. RTP packets are sent to port 3000.
C-25