Aastra 9000i Series Administrator's Manual page 657

Configuring the 802.1x Protocol Using the Aastra Web UI
Use the following procedure to configure the 802.1x Protocol on your phone using the Aastra
Web UI.
Aastra Web UI
1 Click on Advanced Settings->802.1x Support.
To configure EAP-MD5:
2 In the "EAP Type" field, select EAP-MD5.
Valid values are: Disabled (Default), EAP-MD5, and EAP-TLS.
3 In the "Identify" field, enter an Identity for the IP phone for which you are configuring 802.1x.
For example, phone1.
4 In the "MD5 Password" field, enter a password used for the MD5 authentication of the phone.
For example, password1.
5 Click
To configure EAP-TLS:
1 Click on Advanced Settings->802.1x Support.
6-36
to save your changes.
41-001343-01 Rev 02, Release 3.2.2