Aastra 9000i Series Administrator's Manual page 765

Parameter–
https user certificates
Trusted Certificates
Filename
(in Web UI)
Description
Format
Default Value
Range
Example
A-40
Configuration Files
Aastra Web UI
Specifies a file name for a .PEM file located on the configuration server. This
file contains the User-provided certificates in PEM format. These certificates
are used to validate peer certificates.
Note: You must disable the "https validate certificates" parameter in order
for the phone to accept the User-provided certificates.
You can use this parameter in three ways:
• To download no certificates
• To download a certificate from the original configuration server
• To download a certificate from another specified server
To download a specific file, the string value MUST HAVE A FILENAME at the
end of the string. For example:
https user certificates: ftp://admin:admin!@1.2.3.4:50/path/
phonesHTTPSUserCert.pem
where "path" is the directory and "phonesHTTPSUserCert.pem" is the
filename. If you do not specify a filename, the download fails.
See examples for each below.
Alphanumeric string in the format <filename.pem>
Not Applicable
Not Applicable
The following example downloads no HTTPS user certificate file:
https user certificates:
The following example downloads the HTTPS user certificate file from the
original configuration server.
https user certificates: phonesHTTPSUserCert.pem
The following example uses FTP to download the firmware file
"phonesHTTPSUserCert.pem" (HTTPS user certificate file) from the "path"
directory on server 1.2.3.4 using port 50:
https user certificates:ftp://admin:admin!@1.2.3.4:50/path/
phonesHTTPSUserCert.pem
aastra.cfg, <model>.cfg, <mac>.cfg
Advanced Settings->Network->HTTPS Settings
41-001343-01 Rev 02, Release 3.2.2