Aastra 9000i Series Administrator's Manual page 848

Parameter –
802.1x trusted certificates
Trusted Certificates
(in Web UI)
Description
Format
Default Value
Range
Example
41-001343-01 Rev 02, Release 3.2.2
Aastra Web UI: Advanced Settings->802.1x Support->
EAP-TLS Settings
Configuration Files aastra.cfg, <model>.cfg, <mac>.cfg
Specifies the file name that contains the trusted certificates.
You can use this parameter in three ways:
• To download no certificates
• To download a certificate from the original configuration server
• To download a certificate from another specified server
To download a specific file, the string value MUST HAVE A FILENAME
at the end of the string. For example:
802.1x trusted certificates:ftp://admin:admin!@1.2.3.4:50/path/
phones802TrustedCert.pem
where "path" is the directory and "phones802TrustedCert.pem" is the
filename. If you do not specify a filename, the download fails.
See examples for each below.
String
Not Applicable
Not Applicable
The following example downloads no 802.1x trusted certificate file:
802.1x trusted certificates:
The following example downloads the 802.1x trusted certificate file from
the original configuration server.
802.1x trusted certificates: phones802TrustedCert.pem
The following example uses FTP to download the firmware file
"phones802TrustedCert.pem" (802.1x trusted certificate file) from the
"path" directory on server 1.2.3.4 using port 50:
802.1x trusted certificates:ftp://admin:admin!@1.2.3.4:50/path/
phones802TrustedCert.pem
A-123