Aastra 9000i Series Administrator's Manual page 596

Configuring XML SIP NOTIFY using the Aastra Web UI if an Empty SIP NOTIFY
Message Received by the Phone
Use the following procedure in the Aastra Web UI to configure the XML SIP NOTIFY parameter
when the phone receives an empty SIP NOTIFY message.
Aastra Web UI
1 If the content is missing in the SIP NOTIFY message received by the phone, the phone automatically
uses the value you specify for the Action URI XML SIP Notify parameter at the path Advanced
Settings->Action URI.
Click on Advanced Settings->Action URI.
2 Specify a URI to be called when an empty XML SIP NOTIFY is received by the phone.
For example:
http://myserver.com/myappli.xml
Note: The sip xml notify event parameter at the path Advanced Settings->Global SIP->Advanced
SIP Settings must be enabled.
3 Click
41-001343-01 Rev 02, Release 3.2.2
to save your changes.
5-319