Aastra 9000i Series Administrator's Manual page 934
Ip sip phones
Hide thumbs
Also See for 9000i Series:
- Administrator's manual (876 pages) ,
- Configuration manual (27 pages) ,
- Instruction manual (29 pages)
Table of Contents
Advertisement
Format
Default Value
41-001343-01 Rev 02, Release 3.2.2
•
flash - Indicates programmable key is set to generate a flash event
when it is pressed. The IP phone generates flash events only when
a call is connected and there is an active RTP stream (for example,
when the call is not on hold).
•
sprecode - Indicates programmable key is configured to
automatically activate specific services offered by the server. For
example, if the sprecode value of *82 is configured, then by
pressing the softkey, *82 automatically activates a service provided
by the server.
•
park - Indicates programmable key is configured to park incoming
calls when pressed.
•
pickup - Indicates programmable key is configured to pick up
parked calls when pressed.
•
lcr - Indicates programmable key is configured for "last call return"
when pressed.
•
callforward - Indicates the programmable key is configured for
accessing the Call Forward features on the phone. A Call
Forwarding Mode must be enabled to use this softkey. "Account"
mode is the default.
•
blfxfer - Indicates the programmable key is configured to transfer
calls AND configured for BLF on a single key.
•
speeddialxfer - Indicates the programmable key is configured to
transfer calls AND configured for speeddialing to a specific number.
•
speeddialconf - Indicates the programmable key is configured to
be used as a speeddial key AND as a conference key.
•
directory - Indicates programmable key is configured to access the
Directory List.
•
callers - Indicates programmable key is configured to access the
Callers List.
•
conf - Indicates programmable key is configured as a conference
key. Enter as "conf" in configuration files.
•
xfer- Indicates programmable key is configured as a Transfer key
for transferring calls. Enter as "xfer" in configuration files.
•
services - Indicates the programmable key is set to be used as the
Services key.
•
phonelock - Indicates the programmable key is set to be used to
lock/unlock the phone.
•
paging - Indicates the softkey is set for Group Paging on the phone.
Pressing this key automatically sends a Real Time Transport
Protocol (RTP) stream to pre-configured multicast address(es)
without involving SIP signaling.
•
empty - Indicates programmable key is configured to force a blank
entry on the IP phone display for a specific programmable key.
Text
Not Applicable
A-209
Advertisement
Table of Contents
Troubleshooting
