Aastra 9000i Series Administrator's Manual page 321

where <ISO 639> is the language code specified in Standard ISO 639
(see Appendix A, the section,
<ISO 3166> is the country code specified in Standard ISO 3166 (see
Standard ISO 3166)
The <ISO 3166> attribute is optional.
Example
The following is an example of the parameters you would enter in the <MAC>.cfg file to load a
French, Italian, German, and Spanish language pack to the IP phone.
language 1: lang_fr_ca.txt
language 2: lang_it.txt
language 3: lang_de.txt
language 4: lang_es_mx.txt
The above entries in the <MAC>.cfg file tells the phone which language packs to load. When the
language pack(s) have loaded, you must then use the configuration files IP Phone UI to specify
which language to display on the IP phone. You must use the Aastra Web UI to specify the
language to use in the Web UI.
References
For more information about specifying the language to use, see the section,
Screen Language to Use"
For more information about language codes and country codes, see Appendix A, the section,
"Language Pack Settings"
Loading Language Packs via the Aastra Web UI
Using the Aastra Web UI, you can specify a language pack to load using the parameters at Basic
Settings->Preferences->Language Settings.
5-44
Language Codes (from Standard ISO 639)
on page A-175).
Note: Adding/changing language packs can only be done at bootup of the
IP phone. The default language (English) cannot be changed or removed.
on page
on page
5-46.
A-173.
41-001343-01 Rev 02, Release 3.2.2
on page A-175) and
Country Codes (from
"Specifying the