Aastra 9000i Series Administrator's Manual page 872

Parameter –
action uri onhook
Onhook
(in Web UI)
Description
Format
Default Value
Range
Example
Parameter–
action uri disconnected
Description
Format
Default Value
Range
Example
41-001343-01 Rev 02, Release 3.2.2
Aastra Web UI
Configuration Files
Specifies the URI for which the phone executes a GET on when an
onhook event occurs. This parameter can use the following variables:
$$LOCALIP$$
$$CALLDURATION$$
$$CALLDIRECTION$$
$$LINESTATE$$
Note: The "LocalIP", "CallDuration", and "CallDirection" variables allow
for enhanced information in call records and billing applications.
Fully qualified URI
Not Applicable
Up to 128 ASCII characters
action uri onhook: http://10.50.10.140/onhook
Aastra Web UI Advanced Settings->Action URI->Event
Configuration Files aastra.cfg, <model>.cfg, <mac>.cfg
Specifies the URI that the phone executes a GET on, when it transitions from
the incoming, outgoing, calling, or connected state into the idle state.
This parameter uses the following variables to determine the state of the line:
$$LINESTATE$$
$$LOCALIP$$
String
Not Applicable
Any valid URI
action uri disconnected: http://fargo.ana.aastra.com/
disconnected.xml?state=$$LINESTATE$$
Advanced Settings->Action URI
aastra.cfg, <model>.cfg, <mac>.cfg
A-147