Aastra 9000i Series Administrator's Manual page 402

Limitations for Malaysian Cadences
• The phone does not apply a different volume level to the first part of the call waiting tone.
• The level of the 50Hz modulation signal for ring back is 90%.
Configuring Priority Alerting and Ring Tone Cadences using the Configuration
Files
Use the following procedures to configure priority alerting and ring tone cadences on the IP
phones.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the sections,
• "Priority Alert Settings"
• "Bellcore Cadence Settings"
Configuring Priority Alerting using the Aastra Web UI.
Use the following procedure to configure Priority Alerting using the Aastra Web UI.
Aastra Web UI
1 Click on Basic Settings->Preferences.
2 In the "Priority Alerting Settings" section, enable the "Enable Priority Alerting" field by checking the
check box. (Disable this field by unchecking the box).
41-001343-01 Rev 02, Release 3.2.2
on page A-162.
on page A-168.
Note: You can configure Bellcore cadences using the configuration files
only.
5-125