Aastra 9000i Series Administrator's Manual page 592

Aastra Web UI
1 Click on Advanced Settings->Action URI->Event.
2 In the "Disconnected" field, enter a valid URI for which the phone executes a GET on, when it
transitions from the incoming, outgoing, calling, or connected state into the idle state. Leaving this
field empty disables the Action URI Disconnected feature. For example,
http://fargo.ana.aastra.com/disconnected.xml?state=$$LINESTATE$$
The following table lists the applicable values and descriptions for the $$LINESTATE$$.
$$LINESTATE$$ Value
IDLE
DIALING
CALLING
OUTGOING
INCOMING
CONNECTED
CLEARING
3 Click
41-001343-01 Rev 02, Release 3.2.2
Description
Phone is idle.
Phone is offhook and ready
to dial.
A SIP INVITE was sent but
no response was received.
Remote party is ringing.
Local phone is ringing.
Parties are talking.
Call was released but not
acknowledged.
to save your settings.
Meaning in a
Disconnected URI
N/A
N/A
Error occurred during the call.
Call was cancelled.
Call was missed or cancelled.
Call was successful.
N/A
5-315