Aastra 9000i Series Administrator's Manual page 308

IP Phone UI
Step Action
6 Press the
7 Press the
Setting Time Server Using the Aastra Web UI
Use the following procedure to set the Time Server and optionally set the IP Address of Time
Servers 1, 2, and/or 3.
Aastra Web UI
1 Click on Basic Settings->Preferences->Time and Date Setting.
To enable/disable Time Server:
2 The "NTP Time Server" field is enabled by default. If you need to disable the Time Server, uncheck
the box. The Time Server 1, 2, and 3 fields are grayed out when disabled.
To set Time Server 1, 2, and/or 3:
3 Note: The "Time Server" field must be enabled to enter values in the "Time Server 1, 2, and 3"
fields.
In the "Time Server 1", "Time Server 2", and/or "Time Server 3" field(s), enter the IP address of the
Time Server 1, 2, and/or 3 in your network, in dotted decimal format. Default for this field is 0.0.0.0.
For example, 132.234.5.4
4 Click
41-001343-01 Rev 02, Release 3.2.2
to return to the previous screen.
button or the button at any time to return to the idle screen.
to save your changes.
5-31