Aastra 9000i Series Administrator's Manual page 932

Parameter –
softkeyN states
Idle, Connected, Incoming,
Outgoing, Busy
(in Web UI)
Description
Format
Default Value
Range
Example
41-001343-01 Rev 02, Release 3.2.2
Aastra Web UI
Configuration Files
Displays the status of the phone when a softkey is pressed. You can
enter multiple values (idle, connected, incoming, outgoing, busy) for
the "softkeyN state" parameter.
You must associate the softkeyN state parameter with a specific softkey.
In the following example, the softkeyN states parameter is associated
with softkey 12:
softkey12 type: speeddial
softkey12 label: voicemail
softkey12 value *89
softkey12 states: outgoing
Note: The IP phone idle screen condenses the softkeys. So in the
previous example, softkey 12 will appear in position 1 if no other softkeys
are set. A softkey type of "empty" does not display on the idle screen at
all.
Text
For softkey type - None:
All states disabled
For softkey types - Line, DND, speeddial, BLF, BLF List, dcp, XML,
lcr, callforward,blfxfer, speeddialxfer, speeddialconf, Directory,
Callers List, Icom, Services, empty:
idle, connected, incoming, outgoing
For softkey type - Flash:
All states disabled
For softkey type - Park:
connected
For softkey type - Pickup:
idle, outgoing
For softkey type - acd:
idle
Valid values are:
idle The phone is not being used.
connected The line currently being displayed is
in an active call (or the call is on hold)
incoming The phone is ringing.
outgoing The user is dialing a number, or the
far-end is ringing.
busy The current line is busy because the line is in use or
the line is set as "Do Not Disturb"
Note: For softkey type, Pickup, values can be: just idle, just outgoing, or
idle outgoing.
softkey1 states: idle incoming outgoing
softkey2 states: connected
Operation->Softkeys and XML
aastra.cfg, <model>.cfg, <mac>.cfg
A-207