Aastra 9000i Series Administrator's Manual page 853

Per-Line Settings
Parameter –
sip lineN dtmf method
DTMF Method
(in Web UI)
Description
Format
Default Value
Range
Example
Parameter –
sip lineN srtp mode
Description
Format
Default Value
Range
Example
A-128
Aastra Web UI Advanced Settings->Global SIP->RTP Settings
Configuration Files aastra.cfg, <model>.cfg, <mac>.cfg
Sets the Dual-tone multifrequency (DTMF) method to use on the IP
phone for a specific line.
Integer
0 (RTP)
0 (RTP)
1 (SIP INFO)
2 (BOTH)
sip line1 dtmf method: 1
Aastra Web UI Advanced Settings->Line <1-9>->RTP Settings
Configuration Files aastra.cfg, <model>.cfg, <mac>.cfg
This parameter determines if SRTP is enabled on this line, as follows:
• If set to -1, then use the global setting for this line. (This is the
default setting.)
• If set to 0, then disable SRTP.
• If set to 1 then SRTP calls are preferred.
• If set to 2, then SRTP calls only are generated/accepted.
Integer
0 (disabled)
-1
0
1
2
sip line1 mode: 1
41-001343-01 Rev 02, Release 3.2.2