Aastra 9000i Series Administrator's Manual page 219

Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section,
Area Network (VLAN) Settings"
IP Phone UI
Step Action
1 Press on the phone to enter the Options List.
2 Select Administrator Menu.
3 Enter your Administrator password.
Note: The IP Phones accept numeric passwords only.
4 Select Network Settings.
5 Select VLAN Settings.
To globally enable/disable VLAN and set priority for non-IP packets:
6 Select VLAN Enable.
7 Press Change to set VLAN Enable to "Yes" to enable or "No" to disable. Default is "No".
8 Press Done to save the changes.
9 Select Phone VLAN.
10 Select VLAN Priority.
11 Select Other and enter a non-IP priority value from 0 to 7 for non-IP packets.
Default for this field is 5.
12 Press Done (3 times) to return to the VLAN Settings menu.
To set VLAN ID and priority for LAN Port (Port 0):
13 Select Phone VLAN.
14 Select Phone VLAN ID and enter a value from 1 to 4094 to specify the VLAN ID for the LAN Port.
Default is 1.
15 Press Done to save the change.
16 Select VLAN Priority.
17 Select one of the following VLAN Protocols:
• SIP Priority
• RTP Priority
• RTCP Priority
18 Enter a VLAN priority value from 0 to 7 for the associated Protocol. Default values for each Protocol
are:
SIP Priority = 3
RTP Priority = 5
RTCP Priority = 5
4-56
on page A-41.
"Virtual Local
41-001343-01 Rev 02, Release 3.2.2