Aastra 9000i Series Administrator's Manual page 941

Parameter –
topsoftkeyN value
Top Softkeys->Value
(In WEb UI)
Description
Aastra Web UI
Configuration Files
This is the value you assign to the softkey.
The "topsoftkeyN value" parameter can be set for the following softkey
types only:
• speeddial (you can enter a speeddial number for this field;
optionally, you can also enter a prefix for the
speeddial value to allow the phone to dial the prefix
after you press the speeddial programmable key;
you then enter the rest of the number from the
keypad on the phone.)
• blf
• sprecode
• park
• pickup
• dcp
• xml
• blfxfer
• speeddialxfer
• speeddialconf
• paging
Notes:
1. For speeddial - Value is the phone number, extension, or prefix
number to enter for the softkey.
2. For blf - Value is the extension you want to monitor.
3. For sprecode - Value is dependent on services offered by server.
4. For Park, Pickup - For valid values, see Chapter 5, the section,
"Park/Pickup Call Server Configuration Values"
Park/Pickup examples, see Chapter 5, the section,
Models with 8 and 11-Line LCDs"
5. For xml - You can specify a URI to use for this XML softkey. The
variables you can use with the XML softkey URI are:
• $$SIPUSERNAME$$
• $$SIPAUTHNAME$$
• $$PROXYURL$$
• $$LINESTATE$$
• $$LOCALIP$$
• $$REMOTENUMBER$$
• $$DISPLAYNAME$$
• $$SIPUSERNAME$$
• $$INCOMINGNAME$$
• $$CALLDURATION$$
• $$CALLDIRECTION$$
Operation->Softkeys and XML
aastra.cfg, <model>.cfg, <mac>.cfg
on page -214.
on page -215. For
"Examples for