Use the following parameters to configure preferred line focus using the Aastra Web UI.
Aastra Web UI
1
Click on Basic Settings->Preferences->General.
2
In the "Preferred Line" field, select a preferred line to switch focus to after incoming or outgoing
calls end on the phone. Valid values are:
•
None (disables the preferred line focus feature)
•
1 to 9
Default is 1.
For example, if you set the preferred line to "1", when a call (incoming or outgoing) ends on the
phone (on any line), the phone switches focus back to Line 1.
3
In the "Preferred Line Timeout" field, enter the amount of time, in seconds, that the phone
switches back to the preferred line after a call (incoming or outgoing) ends on the phone, or after a
duration of inactivity on an active line. Default is 0. Valid values are:
•
0 to 999
4
Click
41-001343-01 Rev 02, Release 3.2.2
to save your changes.
5-91