Aastra 9000i Series Administrator's Manual page 855

Per-Line Settings
Parameter –
sip lineN autodial number
Autodial Number
(in Web UI)
Description
Format
Default Value
Range
Examples
Parameter –
sip lineN autodial timeout
AutoDial Timeout
(in Web UI)
Description
Format
Default Value
Range
Examples
A-130
Aastra Web UI Advanced Settings->LineN->Autodial Settings
Configuration Files aastra.cfg, <model>.cfg, <mac>.cfg
On a per-line basis, this parameter specifies the SIP phone number that
the IP phone autodials when the handset is lifted from the phone cradle.
Valid values can be:
-1 (Default) The phone uses the global
autodial setting for this line.
Blank (Empty field) Disables autodial on this line.
Valid SIP Number Dials the SIP number specified for this line.
Integer
-1
Any valid SIP number.
sip line1 autodial number: 8500
Aastra Web UI Advanced Settings->LineN->Autodial Settings
Configuration Files aastra.cfg, <model>.cfg, <mac>.cfg
On a per-line basis, this parameter specifies the time, in seconds, that
the phone waits to dial a preconfigured number after the handset is
lifted from the IP phone cradle.
If this parameter is set to 0 (hotline), the phone immediately dials a
preconfigured number when you lift the handset. If this parameter is set
to a value greater than 0, the phone waits the specified number of
seconds before dialing the preconfigured number (warmline) when you
lift the handset.
Default is 0 (hotline).
Integer
0
0-120
sip line1 autodial timeout: 30
41-001343-01 Rev 02, Release 3.2.2