Aastra 9000i Series Administrator's Manual page 921

Parameter –
call transfer disabled
Description
Format
Default Value
Range
Example
Parameter –
map redial key to
Map Redial Key To
(in Web UI)
Description
Format
Default Value
Range
Example
A-196
Configuration Files
Enables or disables the Xfer key on the IP phone. If this parameter is set
to 0, the key is active and can be pressed by the user. If this parameter is
set to 1, pressing the Xfer key is ignored.
Boolean
0 (false)
0 (false), 1 (true)
call transfer disabled: 1
Aastra Web UI
Configuration Files
Sets the Redial key as a speeddial key if a value is entered for this
parameter. If you leave this parameter blank, the Redial key returns to its
original functionality.
Note: If you configure the Redial key for speeddialing on the 6757i CT
Base Station, the Redial key on the 6757i CT handset retains its original
functionality. The Redial key on the handset is not configured for
speeddial.
Integer
Not Applicable
Not Applicable
map redial key to: 5551234
aastra.cfg, <model>.cfg, <mac>.cfg
Basic Settings->Preferences->Key Mapping
aastra.cfg, <model>.cfg, <mac>.cfg
41-001343-01 Rev 02, Release 3.2.2