Aastra 9000i Series Administrator's Manual page 795

Parameter –
sip dial plan terminator
Send Dial Plan Terminator
(in Web UI)
Description
Format
Default Value
Range
Example
Parameter –
sip digit timeout
Digit Timeout
(in Web UI)
Description
Format
Default Value
Range
Example
A-70
Aastra Web UI Basic Settings->Preferences
Configuration Files aastra.cfg, <model>.cfg, <mac>.cfg
Allows you to enable or disable a dial plan terminator. If you enable the
use of this parameter, when you configure the IP phone's dial plan with a
dial plan terminator or timeout (such as the pound symbol (#)), the phone
waits 4 or 5 seconds after you pick up the handset or after to finish
dialing the number on the keypad before making the call.
Boolean
0
0 (Disable)
1 (Enable)
sip dial plan terminator: 1
Aastra Web UI Basic Settings->Preferences
Configuration Files aastra.cfg, <model>.cfg, <mac>.cfg
Represents the time, in seconds, between consecutive key presses on
the IP phone. The default for this parameter is 4 seconds. If you press a
key on the phone and wait 4 seconds before pressing the next key, the
key times out and cancels the digit selection. You must press consecutive
keys before the timeout occurs.
Integer
4
Not Applicable
sip digit timeout: 6
41-001343-01 Rev 02, Release 3.2.2