Telnet Access; Terminal Port - Gefen Multiview EXT-HD-MVSL-441 User Manual

Operating the 4x1 Multiview Seamless Switcher for HDMI
Use the ▲ or ▼ buttons to highlight the option to change. The Telnet Access option
5.
will be highlighted, automatically.
6. Once the desired option is highlighted, press the Select button to select it. If using the
IR remote control, press the OK button.
When an option is selected, its current value will be highlighted in orange.
T E L N E T S E T T I N G S
T E L N E T A C C E S S
R E Q U I R E PA S S W O R D
T E R M I N A L P O RT
B A C K
E X I T
7. Use the ◄ or ► buttons to change the current value.
8. Press the Select button to accept the current changes. If using the IR remote control,
press the OK button.
Enables (Yes) or disables (No) Telnet access for the 4x1 Multiview Seamless Switcher for
HDMI.
Enables (Yes) or disables (No) the password prompt at the beginning of a Telnet session.
Sets the Telnet listening port for the 4x1 Multiview Seamless Switcher for HDMI.
N o
N o
0 0 2 3

Telnet Access

Require Password

Terminal Port

page | 61
Menu System