Gefen Multiview EXT-HD-MVSL-441 User Manual page 110

Chapter Advanced Operation
#set_preset_name
The #set_preset_name command assigns a name to the specified preset. The name of
the preset is limited to 8 characters. Names longer than 8 characters will be truncated.
To display the name of a preset, use the
through 5 cannot be changed.
Syntax
#set_preset_name param1 param2
Parameters
param1
param2
Example
#set_preset_name 8 MyWinCfg
MyWinCfg NAME IS ASSIGNED TO PRESET 8
#show_preset_name
Preset
Name
page | 100
Commands
command. Presets 1
[6 ... 20]
[STRING]