Gefen Multiview EXT-HD-MVSL-441 User Manual page 171

Advanced Operation Chapter
Browse...
Click this button to select the firmware file to be uploaded. See
Firmware for details on updating the firmware.
Update
Click this button to begin the update process, once the firmware file is selected.
IR Channel
This feature will be available in a future release of firmware. The IR channel
of the 4x1 Multiview Seamless Switcher for HDMI is set to channel 0. The IR
remote must be set to the same channel. See
information.
Reset
Click this button to set the switcher to factory-default settings. The TCP/IP
settings are preserved.
Reboot
Click this button to reboot the switcher.
Setting the IR Channel
page | 161
Web Interface
Upgrading the
for more