Gefen Multiview EXT-HD-MVSL-441 User Manual page 118

Chapter Advanced Operation
#set_vposition
The #set_vposition command sets the vertical position of the specified window.
param2 is the number of vertical pixels for the resolution of the specified window.
This command is only applicable when viewing multiple windows. Executing this
command when viewing a single window will return an error.
Syntax
#set_vposition param1 param2
Parameters
param1
param2
Example
#set_vposition 2 100
SET VERTICAL POSITION VALUE TO 100 PIXELS FOR WINDOW 2
If command is executed when viewing a single window:
#set_vposition 2 100
CURRENT ROUTING STATE IS WRONG!
Window
Vertical Pixels (active)
page | 108
Commands
[1 ... 4]
[0 ... n]