Advertisement
Advertisement
Table of Contents
Related Manuals for Gefen HDMI1.3-341
Summary of Contents for Gefen HDMI1.3-341
- Page 2 Chatsworth, CA 91311 www.gefen.com support@gefen.com Gefen Inc. reserves the right to make changes in the hard ware, packaging and any accompanying doc u men ta tion without prior written notice. 3x1 Switcher for HDMI 1.3 is a trademark of Gefen Inc.
-
Page 3: Table Of Contents
Introduction Features Panel Descriptions Connecting and Operating the 3x1 Switcher for HDMI 1.3 RMT3-IR Installation IR Code Confl icts Specifi cations Warranty TABLE OF CONTENTS... -
Page 4: Introduction
HDMI cable to regenerate the HDMI signal. Our Commitment Gefen will always offer the fi nest quality product at the best possible price. Included in that price is a lifetime support from a team of outstanding engineers. -
Page 5: Features
FEATURES Features • Switches easily between any three HDMI 1.3 sources • Maintains 480i/p, 576i/p, 720p, 1080i, and 1080p resolutions • Maintains highest HDMI single link video resolution • Supports HDCP compliant devices • HDMI or DVI to HDMI cables are used to connect the inputs and switcher output •... -
Page 6: Panel Descriptions
PANEL DESCRIPTIONS Selector Button FRONT Power Indicator IR Eye Input Indicator LED’s BACK Input 1 Input 2 Input 3 HDMI Output 5VDC Power IR Eye Supply Input Extension Port... -
Page 7: Connecting And Operating The 3X1 Switcher For Hdmi 1.3
CONNECTING AND OPERATING THE 3X1 SWITCHER FOR HDMI 1.3 How to Connect the 3x1 Switcher for HDMI 1.3 to your devices Connect the supplied cables from the HDTV HDMI sources into the 3x1 Switcher for HDMI 1.3. Connect the cable from your display (monitor or projector) into the HDMI out of the 3x1 Switcher for HDMI 1.3. -
Page 8: Rmt3-Ir Installation
1. Remove battery cover from the back of the RMT3-IR remote. 2. Verify that dip switches 1 & 2 are in the down (OFF) position. 3. Insert the battery, hold the battery so that you can see the positive side facing up. The side that is not marked must be facing down. -
Page 9: Ir Code Confl Icts
Switch 1 on the remote is linked to switch 1 on the unit, and switch 2 on the remote is linked to switch 2 on the unit. There are 4 possible sets of IR codes and at least one of these sets should be able to resolve any IR confl... -
Page 10: Specifi Cations
SPECIFICATIONS Video Amplifi er Bandwidth ...225 MHz Input Video Signal ...1.2 Volts p-p Input DDC Signal ...5 Volts p-p (TTL) Single Link Resolution ...1080p/60 10 bit Color Depth, 1920x1200 HDMI Connector ...Type A 19 Pin Female Remote Control Port ...Mini-Stereo Power Supply ...5V DC Power Consumption ...5 Watts (max) Dimensions ...9.25”W x 1”H x 2.75”D...
Need help?
Do you have a question about the HDMI1.3-341 and is the answer not in the manual?
Questions and answers