Gefen EXT-HDMI1.3-244 User Manual

Optional 2:4 HDMI 1.3 Splitter (Pre-Order)
Accessories
Access up to Two Sources from up to Four Displays
2 Sources + 4 Displays = Greater Integration Options
Gefen's 2x4 HDMI™ Switcher is equipped with two HDMI™ inputs and four HDMI outputs. Two
inputs accommodate the simultaneous connection of up to two high definition video sources, such
as satellite systems and HD DVD players. four outputs send the high definition audio/video signals
to up to four high definition displays. Switching is done via the IR remote that is provided with the
RMT IR Extender
unit.
Fully HDCP Compliant
HDCP (high bandwidth digital content protection) is a standard encoded into the video signal to
prevent it from being pirated. If a source device is HDCP coded and is connected to a display or
projector without the proper decoding mechanism, the picture is relegated to "snow" or in some
cases, very low (480P) resolutions of the images. In order to see high resolution digital video with
HDCP compliance, both the source, the display and anything in between must be equipped with
HDMI connections that can enable HDCP decoding, such as the 2x4 HDMI Switcher.
HDMI Cables
How It Works
You simply connect all your sources to the Switcher's inputs. Then connect up to four displays on
the output ports. Once the sources, the Switcher and the display(s) are powered and connected,
you simply select which source you want to view using the IR remote.
Note: This HDMI product supports BOTH Audio and Video signals.
All displays that cannot show the same video resolution(s) as the Primary Display connected to
Output #1 may fail to show a picture. Secondary displays follow the Primary by sharing the
resolution and capability information (EDID) obtained from the Primary Display.
DVI, HDCP & HDMI Defined
HDMI 1.3 Features:
Lip-Sync Pass Through
225 MHz (up to 12 bit YUV 444 supported @ 1080p)
Deep Color Supported (XV Color Supported)
Color Space Conversion Supported
Dolby TrueHD & DTS Master Supported
CEC Pass Through
Features:
Switch easily between any two HDMI™/DVI sources
Outputs are mirrored to four HDMI™/DVI displays simultaneously
Maintains high resolution video - beautiful, sharp HDTV resolutions up to 1080p, 2k, and
computer resolutions up to 1920 x 1200 are easily achieved
Discrete IR remote (included)
HDMI™ compliant
HDCP compliant

Specifications:

Video Amplifier Bandwidth: 225 MHz
Input Video Signal: 1.2 volts p-p
Input DDC Signal: 5 volts p-p (TTL)
Single Link Range: 1080p/60 12 bit color depth, 1920x1200
HDMI Connector: type A 19 pin female
Power Supply: 5V DC
Power Consumption: 10 watts (max)
Dimensions: 12"W x 1.25"H x 4.25"D
Shipping Weight: 6 lbs.

Package Includes:

2x4 HDMI Switcher
RMT-2IR Remote Control
Two 6-foot HDMI cables
5V DC Power Supply
User's Manual
Dystrybucja i sprzedaż: Meditronik Sp. z o.o.
02-952 Warszawa, ul. Wiertnicza 129, tel. (+48 22) 651-72-42, fax (+48 22) 651-72-46
http://www.meditronik.com.pl e-mail: office@meditronik.com.pl
EXT-HDMI1.3-244