Gefen Multiview EXT-HD-MVSL-441 User Manual page 133

Chapter Advanced Operation
#show_tcp_access
The #show_tcp_access command displays the current TCP access state (enabled or
disabled). Use the #set_tcp_access command to enable or disable TCP access.
Syntax
#show_tcp_access
Parameters
None
Example
#show_tcp_access
TCP ACCESS IS DISABLED
#show_telnet_port
The #show_telnet_port command displays the current Telnet port. Use the
#set_telnet_port
Syntax
#show_telnet_port
Parameters
None
Example
#show_telnet_port
TELNET PORT IS 23
command to set the Telnet listening port.
page | 123
Commands